PMP-100 Series

Type: peristaltic

Pump size: 1.5”            

Transfer line: 1”-1.25” (spraying/ pumping) to 1.5” (pumping only)

Weight: 285 lbs.

Power: 115vac 15-20amp 50-60Htz standard, (other power options available)

Air: 11cfm @ 80psi (*air is only used if spraying material)

Pumping volume: Variable speed min. 0 to max. 80 lbs per min. / 4800 lbs per hr./ 2.84 cu yds per hr

 

 

PMP-200 Series

Type: peristaltic

Pump size: 2”

Transfer line: 1.25” to 2”

Weight: 330 lbs.

Power: 208-240vac 1ph or 3ph 12.5-25amp 50-60Htz standard, (other power options available)

Air: 11 to 14cfm @ 80psi (*air is only used if spraying material)

Pumping volume: Variable speed min. 0 to max. 160 lbs per min. / 9600 lbs per hr. / 5.69 cu yds per hr

 

 

PMP-300 Series

Type: peristaltic

Pump size: 3”

Transfer line: 2” to 3” (can be adapted for high volume spraying)

Weight: 425 lbs.

Power: (Hydraulic drive with multiple power options, ie; Gas, Diesle Electric)

Air: 11 to 14cfm @ 80psi (*air is only used if spraying material)

Pumping volume: Variable speed min. 0 to max. 320+ lbs per min. / 19200+ lbs per hr. / 11.39+ cu yds per hr / 

(14yds per hr max. on non fiber fills)

 

Note: All power supplies listed above are electrical and depending on the equipments requirements, it can range from 115vac to 580/600vac, 50 or 60htz

Many can also be made to run via electric, gas or diesel hydraulic & air driven.

The speed ratios listed are for heavy fiber fills, viscous epoxy blends, zero slump type materials.

 For more flow-able non filled materials like gypsum, grout & screed slurries, etc… the volumes can be increased.